TopFlor would like to introduce the general process of running track or track system with international standard.
The land on which the tennis court is built has been carefully checked to ensure that there are no organic materials such as roots, stumps, peat, mud, etc. The area should also be inspected for infiltration of water or from Underground springs or tides. All care services should be taken to ensure that a suitable and stable ground before the construction of tennis courts.
Technical classification for ground floor
A. All vegetation should be removed and sterile ground to prevent growth. The area should be stripped of all surfaces and vegetation below the surface before construction begins.
B. The lowest height of the tennis court surface should be at least 20 cm from the ground from its surrounding landscape.
C. Avoid large trees near the yard fence, falling leaves can damage the paint.
The bottom of the runway is 0x4 and 4x6 stone then asphalt:
D. asphalt after pouring within 14 days before applying any material on the plastic surface.
E. This application will only continue if the surface is dry and clean and the temperature is at least fifty degrees (50 ° F) and rising, and the surface temperature is not more than one hundred and forty degrees (140 ° F). ). No coating is applied when rain is imminent.
F. Each layer in this system must be completely dry before use, usually from 12 hours to 24 hours. Between each layer, check the entire surface. Any defects need to be repaired. Scrape the surface to remove any lumps if any.
The synthetic resin runway is a form of elastic sheath. There are many pitches to choose from when you run the track.
Currently, there are two methods of road construction in the world, each with its own advantages and disadvantages depending on the climatic conditions and technical level and the application of modern equipment in construction.
In humid climates like Vietnam, the model of road running precast plate or easy to blister during use. Incomplete payment model to overcome the flaw. But in order to ensure the quality of the road running, it is necessary to have state-of-the-art machinery and equipment with high technical level.
8.00mm road running system for University and practice:
Top coat, full color system, use material imported from Europe for all grades. First class system from PQ STANDARD PURE.
Meet all common standards for practice, for example IAAF Specification, ASTM F2157-02,
DIN V 18035-6 and EN 14877. Economics for the choice of schools and cultural centers.
12mm thick line paint system:
Full system PQ STANDARD MX with a top layer is polyurethane imported from Europe. Optimal performance and excellent value.
Meet all important international standards, eg IAAF Specification, DIN 18035-6 and EN V 14887.
International Road Paint System 18mm thick:
The road surface consists of two layers of paint. Base layer for rubber granules. Classroom made of polyurethane coating using EPDM grain imported from Europe.
Meet all important international standards, eg IAAF Specification, DIN V 18.035-6, ASTM F2157-02 and EN 14877.